Presowing combinators Kompaktomat
Presowing combinators Kompaktomat Farmet are designed for pre-sowing soil preparation after ploughing. The Kompaktomat performs seven working operations during a single run on the land. After processing the raw furrow with a Kompaktomat, the soil is immediately prepared for sowing. Kompaktomat are either in a carried or semi-carried version, equipped with a running axle.
Main machine advantages
- Machines combining 7 working operations
- Possibility of aggregation with a sowing machine or crumpling rollers
Technical specification
Seven working operations at one stroke
In the working position, the main frame using the front and rear rollers accurately copies the soil surface levelled by skidding. By height adjustment of the auxiliary frame with the main working tools (arrow / chisel shares) against the main frame, you can achieve high quality soil preparation up to an accurately set depth.
In this way, it is possible to meet specific requirements of all crops for optimum seed stemming, savings of humidity, and last but not least also savings of fuel consumption.
By combining several working operations, you can achieve a significant energy, time, labour, and wage costs savings.
Perfect levelling
The K 300 N and K 400 NS mounted Kompaktomat offer an original solution to loosening and covering tractor tracks.
Simple and easy adjustment
The working depth of the machine is easy to adjust. The controls of Kompaktomat are designed is such a manner that maximum safety of operators is ensured. Simple but top-quality design requires just minimum maintenance.
Compact folding
All models of Kompaktomat can be folded for transportation. When folded they do not exceed the maximum transport width of three metres and the maximum transport height of 4 metres. The folding of the machine is hydraulic and fully automatic.
Wide engaging combinators Kompaktomat
In 2008 the Farmet Company introduced new line of presowing combinators with large meshing K1250PS and K1570PS. Working width of these machines are 12,5m or 15,7m. They are used for aggregation with the most powerful class of tractors from 330 to 550 horses. By using the eXtra STEEL line technology the new Compactomats have very favourable weight to 1 m of width and low tractive resistance.
Sophisticated technical solution of tilting gives very compact transport dimensions and excellent manoeuvring. Tilting and folding from the transport position to working position is made by a couple of main piston rods. Compactomat K1250PS comprises 5 working sections and Compactomat K1570PS has 7 working sections. All working sections are connected by swivelling, so they can follow transverse unevenness of the ground.
Special solution of lengthwise rods between chassis and working section enable loose following of working section independently on the chassis. While working, the chassis does not load the working section. Tractive force of the tractor is transmitted to lateral sections by a couple of tractive ropes. While tilting the machine, the ropes automatically raise and no activity of operator is necessary.
The whole process of tilting and folding of the machine is done by the operator easily and safely from the cabin of the tractor. Hydraulically tilting trace cultivators are the standard equipment of the machine. The machines are equipped with brakes and they meet the conditions for traffic on surface roads.
Working section
Variants of share section
Variant Athe central share section with the auxiliary frame fitted with arrow-shaped shares in two rows with the 25 cm engagement width. 
Variant Bthe central share section with the auxiliary frame fitted with two chisel-shaped shares in four rows.
New 2010: Central plough share section mainly to be used on land with a higher occurrence of remainders of plants, due to the larger passage of substance between plough shares. Sweeps are mounted in two rows on columns from pressed spring steel profiles. The share beams avoid obstacles better and are easier to clean.
Roller type
Variant I – rear roller12-bar typediameter 400 mm
Variant II - rear roller with cast-iron wheelsCrosskildiameter 400 mm
New 2011: Ring rollers Can be also fi tted to older machines. The special construction prevents clogging of rollers even under most extreme conditions. 
New 2011: Segment rollers The roller is equipped with effi cient cleaners that ensure work under extreme conditions.
Hydraulic setting depth
New 2010: The hydraulic setting depth of the Kompaktomat machine significantly improves the comfort of operators. It can be installed in all types of machines. The operator simply readjusts the depth of all working sections using a lever on the control panel. Easy-to-orientate indicators show the adjusted depth from the cabin of the tractor. One of the main advantages is the ability to immediately adjust the depth of working sections while driving, for example, when working on land with a variety of soil conditions.
Front leveller hydraulic setting
The front levellers are controlled hydraulically from the comfort of the tractor cabin. This is an optional component of the machine.
Possibility of aggregation with other machinery
Coupling to a sowing machine
The K 300 P – K 930 PS semi-mounted Kompaktomat are normally provided with a rear three-point suspension and with the control hydraulic circuit outlet with quick couplers in the rear part of the machine. This enables operators to couple various accessories such as a sowing machine, the crumbling Croskill rollers, etc.
For that reason, all semi-mounted Kompaktomat are provided with wide, floating tires to ensure sufficient throughput of the machine.
Hydraulic drive for the sowing machine
Kompaktomat can be provided with an auxiliary hydraulic motor (1000 r. p. m.) for coupling the machine to a sower with a mechanical drive of the air-operated sowing mechanism.