Chisel cultivators Triolent

The machine is suitable for standard stubble working, as well as working to a depth of 35cm which is greater then most normal ploughing. The machine is equipped with three rows of working tines, with tine spacing of 290 mm which provides for quality soil working and incorpartion of plant residues with relatively low draught requirment. The tines are equipped with a spring protection with the release power of 450 kg and they enable working to the depth of 35 cm. When working to the depth of 20 cm, it is possible to equip the points with wings. For greater depths, it is better to work without the wings, which significantly decreases draught requirment while keeping the quality of work. The chiesel points may be equipped with tungsten plates that significantly increase the working life of the point and ensure‘s optimal geometry during its entire lifespan. There are levelling discs located behind the tines that level the soil surface. To achive a good surface tilth plus good consolidation of the surface layers, it is necessary to select a suitable rear roller. There are 6 types of rollers. In addition to the depth control of the machine, the roller ensures good consolidation of the soil, bracking of the clods and levelling the surface. The foldable version of the machines may also be used when folded and thus it is possible to use a less powerful tractor, but still able to work at Max working depth.